Equalogic Backup Drive: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
This needs to be | === Objective === | ||
Leverage the Burke Lab iSCSI device to add to and assist with the migration of the GACRC SAN from 10.0.0.0/8 IP addresses to 192.168.0.0/16 IP addresses. This needs to happen because the SAN VLAN is unable to be monitored. A monitoring node cannot have interfaces on separate networks with the same IP addresses and the 10.0.0.0/8 network is already used on the internodal network (VLAN 40). | |||
*Need | == Completed == | ||
* Remove Franklin configuration | |||
* Configure ports in the Thumper Rack for VLAN 31 | |||
* Configure IP addresses | |||
* Add VMKernel interfaces with 192.168/16 IP addresses to ESX hosts | |||
* Create LUNs | |||
* Attach LUNs to VMWare Hosts | |||
* Begin Migrating VMs | |||
* Monitor LUN Latency and adjust | |||
* Gave Burke iSCSI unit definition in Rocks | |||
* Name: gacrc-iscsi-2 | |||
* MGMT IP address: 172.16.33.114 | |||
* iSCSI Access IP addresses: 192.168.0.1, 192.168.0.2, 192.168.0.3, 192.168.0.4 netmask 255.255.0.0 | |||
== Need to be Completed == | |||
* Migrate ALL VMs | |||
* Change Equalogics IP addresses | |||
* Migrate some VMs back | |||
* Decide based on LUN latency how to proceed with storage provisioning | |||
== Notes == | |||
* Use Burke iSCSI as Virtual Machine backup? | |||
* Use Burke iSCSI as exports for Gluster? | |||
* Use Both Burke iSCSI And Equalogics for VMWare | |||
Revision as of 17:35, 9 July 2013
Objective
Leverage the Burke Lab iSCSI device to add to and assist with the migration of the GACRC SAN from 10.0.0.0/8 IP addresses to 192.168.0.0/16 IP addresses. This needs to happen because the SAN VLAN is unable to be monitored. A monitoring node cannot have interfaces on separate networks with the same IP addresses and the 10.0.0.0/8 network is already used on the internodal network (VLAN 40).
Completed
- Remove Franklin configuration
- Configure ports in the Thumper Rack for VLAN 31
- Configure IP addresses
- Add VMKernel interfaces with 192.168/16 IP addresses to ESX hosts
- Create LUNs
- Attach LUNs to VMWare Hosts
- Begin Migrating VMs
- Monitor LUN Latency and adjust
- Gave Burke iSCSI unit definition in Rocks
- Name: gacrc-iscsi-2
- MGMT IP address: 172.16.33.114
- iSCSI Access IP addresses: 192.168.0.1, 192.168.0.2, 192.168.0.3, 192.168.0.4 netmask 255.255.0.0
Need to be Completed
- Migrate ALL VMs
- Change Equalogics IP addresses
- Migrate some VMs back
- Decide based on LUN latency how to proceed with storage provisioning
Notes
- Use Burke iSCSI as Virtual Machine backup?
- Use Burke iSCSI as exports for Gluster?
- Use Both Burke iSCSI And Equalogics for VMWare