Installing Applications on Sapelo2

Introduction

We introduce here some guidance on how to install applications and libraries on Sapelo2.

In general, users can build applications under their home directory or other space owned by the users, like user's group work space.

If an application will be used by several members of a group, GACRC can set a shared directory for the group to host the application.

GACRC team takes requests to install applications at a central place (/usr/local/apps) if the application satisfies the following conditions:

• The application is Linux compatible.
• The application has general interest among users.
• The application needs to be built with special settings, such as root privilege, shared common data set, complex structures, or other requirements.
• The application needs to be configured to integrate into the GACRC environment, such as queue settings or database connections.

---

Back to Top

DO NOT build at login node

Login node has limited memory, most time the build fails due to insufficient memory. All of following installations are under qlogin environment.

---

How to check if an application is installed

To find if an application, e.g. Trinity, is already installed on Sapelo2, use the following command (the application name is NOT case sensitive):

module avail trinity

or

module spider trinity

To see a description of the module (the application name is case sensitive)

module whatis Trinity

To see configuration details, e.g., environment variables, of the module (the application name is case sensitive)

module show Trinity

---

Back to Top

How to check if a library is installed

Perl

To check if a perl library is installed, e.g. DBI, first load the Perl package of interest, for example Perl/5.24.1-foss-2016b:

module load Perl/5.24.1-foss-2016b
perl -MDBI -e 'print "OK\n"'

If the library is not installed, it will warn that the library is not in the path. Otherwise, it will print OK.

Python

To check if a Python library is installed, e.g. numpy, first load the Python package of interest, then run "pip show" or "pip list" commands. The Linux command "which" is to identify if pip is in place. In the following example, we use Python/2.7.14-foss-2016b:

module load Python/2.7.14-foss-2016b
which pip
pip show numpy

To list all installed libraries with their versions:

module load Python/2.7.14-foss-2016b
pip list

To generate an alphabetical list of the libraries installed under a Python version, such as Python/2.7.14-foss-2016b:

module load Python/2.7.14-foss-2016b
pip freeze | sort

For Python3, some versions have both pip3 and pip. pip3 is the Python3 version of pip. If you load Python3, run pip3, otherwise run pip. You can use "which" command to identify if pip3 is in place. For example:

module load Python/3.5.2-foss-2016b
which pip3

Then check if a Python3 library is installed, e.g. using pip3:

module load Python/3.5.2-foss-2016b
pip3 show numpy

To list all installed libraries with their versions:

module load Python/3.5.2-foss-2016b
pip3 list

To generate an alphabetical list of the libraries installed under a Python version, such as Python/2.7.14-foss-2016b:

module load Python/3.5.2-foss-2016b
pip3 freeze | sort

If the library is not installed, it will not be shown by pip or pip3 commands. Otherwise, pip or pip3 will give you libraries' version and installation location.

Note: Some Python libraries are installed outside of the Python default location and are provided as a separate module file that needs to be loaded separately. To check if a python library is installed as a separate module, please use the ml spider command. For example, to check if matplotlib is installed as a separate module:

module spider matplotlib

This command will return all the matplotlib versions currently installed on the cluster, along with the version of Python that it uses. For example, the module named matplotlib/2.1.0-foss-2016b-Python-3.5.2 provides matplotlib version 2.1.0 for Python 3.5.2 and it uses the foss-2016b toolchain. To use this version of matplotlib, please load the module file matplotlib/2.1.0-foss-2016b-Python-3.5.2. Similarly, you can load other module files that provide other Python libraries.

R

To check if a R library is installed, e.g. xtable, first load the R version of interest, for example R/3.4.4-foss-2016b-X11-20160819-GACRC:

xlogin
module load R/3.4.4-foss-2016b-X11-20160819-GACRC
R
require("xtable")
exit

If the library is not installed, it will warn that the library is not in the path. Otherwise, it will print "Loading required package:...".

---

Back to Top

Which node to build from

We suggest that you build applications from an interactive session that you can start with "qlogin" command from Sapelo2 login node:

qlogin

---

Back to Top

How to structure directories

Common practice is to set up the following three directories using "mkdir" command in the user's home directory /home/MyID:

• apps: directory where the applications will be installed
• src: directory under which you can store the source files and build the applications
• modulefiles: directory under which you can put your own module files

These directories can be created with

mkdir ~/apps
mkdir ~/src
mkdir ~/modulefiles

---

Back to Top

How to use local Lmod modules

To use your own modules, e.g. trinity/1.0:

module use ~/modulefiles
module load trinity/1.0

If there are module files with the same name as in our central place, your local ones will take precedence over the central ones.

---

Back to Top

How to install software (general)

If you are interested in using an application, check the website of this application to see if (a) it is compatible with Linux, (b) it is distributed as binaries or source code, (c) and the kind of package that it is (Python library and scripts, Perl scripts, Java, C, C++, Fortran code, etc).

Perl scripts and Java jar files can be downloaded into the users' home directory and run from there.

If the application is distributed as pre-compiled binaries, check if binaries are available for the Linux OS that our cluster run (Sapelo2 runs CentOS 7). Binaries compiled for Window and for Mac OSX cannot be run on Sapelo2. Also, binaries generated in other Linux distributions (e.g. Ubuntu, Debian, etc) will in general not work on Sapelo2.

If pre-compiled binaries are not available for the OS on Sapelo2 (CentOS 7), then you can compile the code yourself, if the source code is available.

Another option for running binaries compatible with other Linux distributions is to create a Singularity container and run it on Sapelo2 (more information below).

---

Back to Top

How to build C, C++ applications

Here is an example on how to install an application called GERUDsim3, which comprise a single C++ program.

1. Login to sapelo2 login node. If you do not have a directory called apps, create one with

mkdir ~/apps

2. Download the application into the ~/apps directory. For the example used here, you can download it with

cd ~/apps

git clone https://github.com/JonesLabIdaho/GERUDsim3.git

3. Start an interactive session with

qlogin

4. compile the code on the interactive node with:

cd ~/apps/GERUDsim3/GERUDsim3/Source_files

g++ GerudSim3.cpp -o GerudSim3

The g++ command that is on user's default path is version 4.8.5. If you wish/need to use a different GNU compiler version, or a different compiler (e.g. Intel), then first load the corresponding module and then compile the code. For example, to use g++ 5.4.0:

cd ~/apps/GERUDsim3/GERUDsim3/Source_files

module load foss/2016b

g++ GerudSim3.cpp -o GerudSim3

5. The name of your executable is GerudSim3. You can run it with the full path

~/apps/GERUDsim3/GERUDsim3/Source_files/GerudSim3

or copy this binary to ~/bin (create this directory first, if it does not exist yet) and run it with

~/bin/GerudSim3

You can also add ~/bin to your default PATH. To do that, add the following in your .bashrc file:

export PATH=/home/MYID/bin/:$PATH

where MYID needs to be replaced by your UGA MyID. With this, any executable you put in ~/bin will be in your PATH and can be invoked without its full path.

For more information on compilers available on Sapelo2, please see Code Compilation on Sapelo2.

---

Back to Top

Cross build for mixed processor architecture

At Sapelo2, we have two types of processors: Intel and AMD.

In some c or c++ applications, the performance-optimized flags may be introduced from the application document or in the configuration, such as -march=native. To enable the built application running on both processors, these native should be removed from compile options or set the flags as -mtune=generic -march=x86-64, which are usually default value if these flags are not set.

The following login commands can provide different processors to test on the built.

qlogin_intel

qlogin_amd

Back to Top

How to install a Perl module

A convenient way to build and install perl modules is to use CPAN, which can be used to install Perl modules in the user's home directory. We suggest that you do this installation in an interactive session.

1. Start an interactive session with

qlogin

2. Decide where you want the perl modules to be installed, e.g. ~/perlmods, and create this directory if it does not exist yet

mkdir ~/perlmods

3. Load the perl module that you want to use, e.g. Perl/5.24.1-foss-2016b

module load Perl/5.24.1-foss-2016b

4. Start the CPAN shell with

cpan

When you start cpan for the first time, some configurations will be set (unless you already have configurations set in ~/.cpan/CPAN/MyConfig.pm

shtsai@n14:~ $ cpan
Loading internal null logger. Install Log::Log4perl for logging messages

CPAN.pm requires configuration, but most of it can be done automatically.
If you answer 'no' below, you will enter an interactive dialog for each
configuration option instead.

Would you like to configure as much as possible automatically? [yes] 


Autoconfiguration complete.

commit: wrote '/home/shtsai/.cpan/CPAN/MyConfig.pm'

You can re-run configuration any time with 'o conf init' in the CPAN shell

cpan shell -- CPAN exploration and modules installation (v2.14)
Enter 'h' for help.

cpan[1]> 

5. From within the CPAN shell, enter the following two (2) commands to specify the installation directory:

cpan[1]> o conf mbuildpl_arg "--install_base /home/MyID/perlmods"
 
     mbuildpl_arg       [--install_base /home/MyID/perlmods]
   Please use 'o conf commit' to make the config permanent!
 
cpan[2]> o conf makepl_arg "PREFIX=/home/MyID/perlmods"
 
    makepl_arg         [PREFIX=/home/MyID/perlmods]
  Please use 'o conf commit' to make the config permanent!
 
cpan[3]>

If you want to set the above installation path as the default one, you can make the settings above permanent by entering "o conf commit". If this is not done, you will need to reset this value every time you restart CPAN. If you do make the settings permanent, you can always change them later and re-commit as shown above. Note that in the two commands above you will need to replace MyID by your own MyID and change perlmods if you are using a different directory name.

6. To install a module (for example, if you want to install "IO::CaptureOutput") enter:

cpan[3]> install IO::CaptureOutput

Respond to any prompts for information that might be requested. When you are finished, enter:

cpan[4]> quit

7. After you have successfully installed a local Perl module, set the PERL5LIB environmental variable to tell Perl where to find the module. For example:

export PERL5LIB=/home/MyID/perlmods:$PERL5LIB

where /home/MyID/perlmods has to be replaced by the path to your installation directory.

You can add this export command to your .bashrc file if you'd like to ensure that this PERL5LIB environment variable is always set when you login and for your non-interactive scripts. If this export line is not added in your .bashrc file, you can add it to your job submission scripts. You can also define a module file where this variable is defined.

---

Back to Top

How to build Python packages

To check what Python versions are installed:

module spider Python

Make sure the right python commands are used.

Most Python versions have commands such as "python", "pip", and "easy_install", some versions have version concatenate after command, such as "python2.7", "python3", "pip3" etc.. So after Python module is loaded, usually we can check if it is the right command by:

which python 
which pip
which pip3         (for Python3 only)
which easy_install

or list the path to confirm the correct python commands, such as:

ls /usr/local/apps/eb/Python/3.5.2-foss-2016b/bin

The above Python binary path can be found by using "ml show" command:

ml show Python/3.5.2-foss-2016b

From outputs, you will find the PATH environment variable pre-appended with the Python binary path, i.e., /usr/local/apps/eb/Python/3.5.2-foss-2016b/bin.

How to install Python package tarball in Sapelo2 home directory

There are several options you can take to install a Python package in your Sapelo2 home directory /home/MyID; MyID should be replaced by your UGA MyID.

Common steps are listed as below:

1. Start an interactive session with "qlogin" command from Sapelo2 login node:

qlogin

2. Suppose you have downloaded a Python package tarball file, e.g., myPackage-1.0.tar.gz, in the source folder (src) in your home directory with a full path as:

/home/MyID/src/myPackage-1.0.tar.gz

Change directory to /home/MyID/src/:

cd ~/src

Uncompress and untar the tarball file using "tar xzvf" command:

tar xzvf myPackage-1.0.tar.gz

3. Once the tarball is untarred, you will have a package source folder in your current directory, e.g., myPackage-1.0/. You need to change directory into it (full path is /home/MyID/src/myPackage-1.0):

cd ./myPackage-1.0

4. Decide which version of Python you want myPackage-1.0 to be installed with. In this example we use Python/2.7.14-foss-2016b:

module load Python/2.7.14-foss-2016b

5. Install package using "python setup.py install" command

• Option 1: using "--user" option. The package will be installed into a default installation location, i.e., /home/MyID/.local/lib/python2.7/site-packages/:

python setup.py install --user

• Option 2 (recommended): using "--user" option with PYTHONUSERBASE environment variable defined and exported. The package will be installed into a location you specified, e.g., /home/MyID/python/2.7.14/lib/python2.7/site-packages/:

mkdir -p /home/MyID/python/2.7.14
export PYTHONUSERBASE=/home/MyID/python/2.7.14
python setup.py install --user

• option 3: using '--prefix' option with PYTHONPATH environment variable defined and exported. The package will be installed into a location you specified, e.g., /home/MyID/python/2.7.14/lib/python2.7/site-packages:

mkdir -p /home/MyID/python/2.7.14/lib/python2.7/site-packages
export PYTHONPATH=/home/MyID/python/2.7.14/lib/python2.7/site-packages
python setup.py install --prefix="/home/MyID/python/2.7.14"

6. Make sure to export the above library path when the package is needed. This can be included in your module file as well. For example:

export PYTHONPATH=/home/MyID/python/2.7.14/lib/python2.7/site-packages:$PYTHONPATH

How to install Python package using pip/pip3 in Sapelo2 home directory

The pip/pip3 is a package management system used to install and manage Python2/Python3 packages, such as those found in the Python Package Index (PyPI). PyPI is a software repository for the Python language. It helps to find and install software developed and shared by the Python community. In this example, let us try scikit-learn-0.19.2, which is the most recent version of scikit-learn package as of 2018-08-28, from PyPI.

Common steps are listed as below:

1. Start an interactive session with "qlogin" command from Sapelo2 login node:

qlogin

2. Decide which version of Python you want myPackage-1.0 to be installed with. In this example we load Python/3.7.0-foss-2018a, then use "which" command to identify if pip3 is in place:

module load Python/3.7.0-foss-2018a
which pip3

"which" command shows pip3 is from Python/3.7.0-foss-2018a module:

/usr/local/apps/eb/Python/3.7.0-foss-2018a/bin/pip3

3. Install package using "pip3 install" command

• Option 1: using "--user" option. The package will be installed into a default installation location, i.e., /home/MyID/.local/lib/python3.7/site-packages/:

pip3 install --user scikit-learn

"pip3 install" command will output and show you that scikit-learn-0.19.2 is successfully downloaded and installed. Then you can use "ls" command to show the package is indeed installed in .local/lib/python3.7/site-packages/, in your home directory:

ls ~/.local/lib/python3.7/site-packages/
scikit_learn-0.19.2.dist-info  sklearn

• Option 2 (recommended): using "--user" option with PYTHONUSERBASE environment variable defined and exported. The package will be installed into a location you specified, e.g., /home/MyID/python/3.7.0/lib/python3.7/site-packages/:

mkdir -p /home/MyID/python/3.7.0
export PYTHONUSERBASE=/home/MyID/python/3.7.0
pip3 install --user scikit-learn

"pip3 install" command will output and show you that scikit-learn-0.19.2 is successfully downloaded and installed. Then you can use "ls" command to show the package is indeed installed in /python/3.7.0/lib/python3.7/site-packages/, in your home directory:

ls ~/python/3.7.0/lib/python3.7/site-packages/
scikit_learn-0.19.2.dist-info  sklearn

5. Make sure to export the above library path when the package is needed. This can be included in your module file as well. For example:

export PYTHONPATH=/home/MyID/python/2.7.14/lib/python2.7/site-packages:$PYTHONPATH

---

Back to Top

How to install Conda packages

To locally install a conda package , option "-p" defines the installation path:

ml Anaconda2/5.0.1
conda install -p "/usr/local/apps/gb/busco/conda_3.0.2" busco=3.0.2 -c bioconda

---

Back to Top

How to install R packages

If you wish to install an R package in your home directory, first decide the directory where you will install it. For example, to install it in ~/Rlibs, first create this dir if it does not exist yet:

mkdir ~/Rlibs

Then, create a file called ~/.Renviron containing the following line:

R_LIBS_USER=/path/to/Rlibs

replacing /path/to/Rlibs with the path that you want to use. For example, to /home/MyID/Rlibs, where MyID needs to be replaced by your UGA MyID.

Start an interactive session and load the module for the version of R you want to use (e.g. R/3.4.4)

qlogin

module load R/3.4.4-foss-2016b-X11-20160819-GACRC

If you download the R package (e.g. brocolors_0.1.tar.gz) to your home dir, you can install it with R CMD INSTALL at the command line, but use the flag --library=/path/to/Rlibs, as follows:

R CMD INSTALL --library=/path/to/Rlibs brocolors_0.1.tar.gz

If you install the package within R using install.packages() or devtools::install(), you just need the ~/.Renviron file; you don’t need to do anything different with the install() command. devtools will use the path defined by the R_LIBS variable.

---

Back to Top

How to install Java applications

Most third-party Java applications are distributed as pre-compiled binaries (jar file), which users can download into their own home directories. For example, to install picard 2.4.1 in your home directory.

1. Create a directory where you want to install the java application (e.g. picard). For example

mkdir -p ~apps/picard

2. Download the package (e.g. picard-tools-2.4.1.zip) from their website, put into your chosen directory (e.g. ~apps/picard) and extract the file. For example

cd ~apps/picard

unzip picard-tools-2.4.1.zip

This will create a directory called picard-tools-2.4.1 that contains picard.jar. You can rename this dir e.g.

cd ~apps/picard

mv picard-tools-2.4.1  2.4.1

3. To run this application, load a java module and invoke this application in your job submission script. For example

module load Java/1.8.0_144

java -Xmx20g -classpath "/home/MyID/apps/picard/2.4.1" -jar  /home/MyID/apps/picard/2.4.1/picard.jar [options]

where MyID needs to be replaced by your own MyID.

---

Back to Top

How to build complex applications

Many applications use a configure step to check on system libraries and path to dependencies in order to create Makefiles. The Makefiles are then used to build and install the application. To illustrate how this process is typically set up, we will describe how to install the GNU Scientific Libraries (GSL) v. 1.16 using the GNU 5.4.0 compilers.

1. Create a directory to use for building the application, e.g. ~/src/gsl

mkdir -p ~/src/gsl

2. Download the source tarball into your chosen directory, e.g.

cd ~/src/gsl

wget http://mirror.sbb.rs/gnu/gsl/gsl-1.16.tar.gz

3. Start an interactive session

qlogin

4. Load the module for the compiler suite that you want to use, e.g. GCC 5.4.0:

module load foss/2016b

5. Change into your working directory and check the tarball with

cd ~/src/gsl

tar ztvf gsl-1.16.tar.gz

and extract the files with

tar zxvf gsl-1.16.tar.gz 

6. Change into the extracted directory

cd gsl-1.16

7. Create a subdirectory to build the application

mkdir build_gcc540

cd build_gcc540

8. Check all the configure options with

../configure --help

9. Configure the application with e.g.

../configure --prefix=/home/MyID/apps/gsl/1.16/gcc540

where /home/MyID/apps/gsl/1.16/gcc540 should be replaced by the directory where you want to install GSL.

You can capture the standard error and standard output of the configure step into a file, to help troubleshoot the step if it encounters any issues. This can be done with

../configure --prefix=/home/MyID/apps/gsl/1.16/gcc540 2>&1 | tee my.config.log

10. If the configure step worked, you can build the application with

make 2>&1 | tee my.make.log

11. Some applications, including GSL, provide some tests that can be run after the build step to ensure the application was built correctly. For example, for GSL you can run

make check 2>&1 | tee my.check.log

12. Install the application with

make install 2>&1 | tee my.install.log

---

Back to Top

How to link dependencies

Some applications need third party program, library, header files to build. There are various ways to introduce these to the build command.

Usually the manual/README of the application would elaborate more about the needed configuration variables. To explore these configuration variables from command is to issue --help options following the main build command.

Such as cmake build,

cmake --help

Or if it is a configuration build,

./configure -h 

To set needed components in build environment, this could simply be done by loading modules prior to build.

module load CMake/3.9.1-foss-2016b  zlib/1.2.8-foss-2016b
cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/apps/gb/diamond/1.0 ..
make install 

Line 1: load cmake module and zlib. Line 2: set prefix, there are other variable could be defined here.

Or set the variables explicitly by export command

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/apps/eb/GSL/GSL/2.3-foss-2016b/lib
export CFLAGS="-I/usr/local/apps/eb/GSL/GSL/2.3-foss-2016b/include"
export LDFLAGS="-L/usr/local/apps/eb/GSL/GSL/2.3-foss-2016b/lib"
python setup.py build_ext --inplace

Line 1: specify the location of gsl lib

Line 2: specify the location of gsl c header file, pass this to gcc option

Line 3: specify the location of gsl lib, pass this to gcc option

Another way is to define variables at configuration line.

./configure --prefix=/usr/local/apps/gb/discovardenovo/52488 --with-jemalloc=/usr/local/apps/eb/jemalloc/5.0.1-GCCcore-4.9.3/lib

---

Back to Top

How to download Singularity images

---

Back to Top

Miscellaneous

---

Back to Top