Shtsai at 00:47, 5 April 2026

2026-04-05T00:47:31Z

← Older revision		Revision as of 20:47, 4 April 2026
Line 1:		Line 1:
	[[Category:~~Teaching~~]][[Category:Software]][[Category:Bioinformatics]]		[[Category:Sapelo2]][[Category:Software]][[Category:Bioinformatics]]
	=== Category ===		== Category ==

	Bioinformatics		Bioinformatics

	=== Program On ===		== Program On ==

	Sapelo2		Sapelo2

	=== Version ===		== Version ==
	2.2.1		2.2.1

	=== Author / Distributor ===		== Author / Distributor ==

	[https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]		[https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

	=== Description ===		== Description ==
	"HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) against the general human population (as well as against a single reference genome)."		"HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) against the general human population (as well as against a single reference genome)."
	More details are at [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]		More details are at [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

	=== Running Program ===		== Running Program ==
	<!--		<!--
	The last version of this application is at /apps/eb/HISAT2/3n-20201216-gompi-2022a		The last version of this application is at /apps/eb/HISAT2/3n-20201216-gompi-2022a
Line 60:		Line 60:
	</pre>		</pre>

	=== Documentation ===		== Documentation ==

	<pre class="gcommand">		<pre class="gcommand">
Line 212:		Line 212:
	[[#top\|Back to Top]]		[[#top\|Back to Top]]

	=== Installation ===		== Installation ==

	Source code is obtained from [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]		Source code is obtained from [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

	=== System ===		== System ==
	64-bit Linux		64-bit Linux

Shtsai at 19:41, 9 January 2026

2026-01-09T19:41:11Z

← Older revision		Revision as of 15:41, 9 January 2026
Line 9:		Line 9:

	=== Version ===		=== Version ===
	2.2.1~~, 3~~		2.2.1

	=== Author / Distributor ===		=== Author / Distributor ===
Line 20:		Line 20:

	=== Running Program ===		=== Running Program ===
			<!--
	The last version of this application is at /apps/eb/HISAT2/3n-20201216-gompi-2022a		The last version of this application is at /apps/eb/HISAT2/3n-20201216-gompi-2022a

Line 26:		Line 26:
	ml HISAT2/3n-20201216-gompi-2022a		ml HISAT2/3n-20201216-gompi-2022a
	</pre>		</pre>
			-->
	To use version 2.2.1, please load the module with		To use version 2.2.1, please load the module with
	<pre class="gscript">		<pre class="gscript">

Chelsea: Created page with "Category:TeachingCategory:SoftwareCategory:Bioinformatics === Category === Bioinformatics === Program On === Sapelo2 === Version === 2.2.1, 3 === Author / Distributor === [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2] === Description === "HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) against the general human population (as well as against a single reference genome)." More..."

2024-05-14T16:22:53Z

Created page with "Category:Teaching Category:Software Category:Bioinformatics === Category === Bioinformatics === Program On === Sapelo2 === Version === 2.2.1, 3 === Author / Distributor === [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2] === Description === "HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) against the general human population (as well as against a single reference genome)." More..."

New page

[[Category:Teaching]][[Category:Software]][[Category:Bioinformatics]]
=== Category ===

Bioinformatics

=== Program On ===

Sapelo2

=== Version ===
2.2.1, 3

=== Author / Distributor ===

[https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

=== Description ===
"HISAT2 is a fast and sensitive alignment program for mapping next-generation sequencing reads (both DNA and RNA) against the general human population (as well as against a single reference genome)."
More details are at [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

=== Running Program ===

The last version of this application is at /apps/eb/HISAT2/3n-20201216-gompi-2022a

To use this version, please load the module with<pre class="gscript">
ml HISAT2/3n-20201216-gompi-2022a
</pre>

To use version 2.2.1, please load the module with
<pre class="gscript">
ml HISAT2/2.2.1-gompi-2022a
</pre>

Here is an example of a shell script, sub.sh, to run on the batch queue:

<div class="gscript2">
<nowiki>#</nowiki>!/bin/bash 
<nowiki>#</nowiki>SBATCH --job-name=j_HISAT2 
<nowiki>#</nowiki>SBATCH --partition=batch 
<nowiki>#</nowiki>SBATCH --mail-type=ALL 
<nowiki>#</nowiki>SBATCH --mail-user=username@uga.edu 
<nowiki>#</nowiki>SBATCH --ntasks=1 
<nowiki>#</nowiki>SBATCH --mem=10gb 
<nowiki>#</nowiki>SBATCH --time=08:00:00 
<nowiki>#</nowiki>SBATCH --output=HISAT2.%j.out 
<nowiki>#</nowiki>SBATCH --error=HISAT2.%j.err 

cd $SLURM_SUBMIT_DIR 
ml HISAT2/2.2.1-gompi-2022a 
hisat2 [options] 
</div>
In the real submission script, at least all the above underlined values need to be reviewed or to be replaced by the proper values.

Please refer to [[Running Jobs on Sapelo2]] for more information running jobs on the Sapelo2 cluster.

Here is an example of job submission command:
<pre class="gcommand">
sbatch ./sub.sh
</pre>

=== Documentation ===

<pre class="gcommand">
ml HISAT2/2.2.1-gompi-2022a
hisat2 -help

HISAT2 version 2.2.1 by Daehwan Kim (infphilo@gmail.com, www.ccb.jhu.edu/people/infphilo)
Usage:
hisat2 [options]* -x <ht2-idx> {-1 <m1> -2 <m2> | -U <r> | --sra-acc <SRA accession number>} [-S <sam>]

<ht2-idx> Index filename prefix (minus trailing .X.ht2).
<m1> Files with #1 mates, paired with files in <m2>.
Could be gzip'ed (extension: .gz) or bzip2'ed (extension: .bz2).
<m2> Files with #2 mates, paired with files in <m1>.
Could be gzip'ed (extension: .gz) or bzip2'ed (extension: .bz2).
<r> Files with unpaired reads.
Could be gzip'ed (extension: .gz) or bzip2'ed (extension: .bz2).
<SRA accession number> Comma-separated list of SRA accession numbers, e.g. --sra-acc SRR353653,SRR353654.
<sam> File for SAM output (default: stdout)

<m1>, <m2>, <r> can be comma-separated lists (no whitespace) and can be
specified many times. E.g. '-U file1.fq,file2.fq -U file3.fq'.

Options (defaults in parentheses):

Input:
-q query input files are FASTQ .fq/.fastq (default)
--qseq query input files are in Illumina's qseq format
-f query input files are (multi-)FASTA .fa/.mfa
-r query input files are raw one-sequence-per-line
-c <m1>, <m2>, <r> are sequences themselves, not files
-s/--skip <int> skip the first <int> reads/pairs in the input (none)
-u/--upto <int> stop after first <int> reads/pairs (no limit)
-5/--trim5 <int> trim <int> bases from 5'/left end of reads (0)
-3/--trim3 <int> trim <int> bases from 3'/right end of reads (0)
--phred33 qualities are Phred+33 (default)
--phred64 qualities are Phred+64
--int-quals qualities encoded as space-delimited integers
--sra-acc SRA accession ID

Presets: Same as:
--fast --no-repeat-index
--sensitive --bowtie2-dp 1 -k 30 --score-min L,0,-0.5
--very-sensitive --bowtie2-dp 2 -k 50 --score-min L,0,-1

Alignment:
--bowtie2-dp <int> use Bowtie2's dynamic programming alignment algorithm (0) - 0: no dynamic programming, 1: conditional dynamic programming, and 2: unconditional dynamic programming (slowest)
--n-ceil <func> func for max # non-A/C/G/Ts permitted in aln (L,0,0.15)
--ignore-quals treat all quality values as 30 on Phred scale (off)
--nofw do not align forward (original) version of read (off)
--norc do not align reverse-complement version of read (off)
--no-repeat-index do not use repeat index

Spliced Alignment:
--pen-cansplice <int> penalty for a canonical splice site (0)
--pen-noncansplice <int> penalty for a non-canonical splice site (12)
--pen-canintronlen <func> penalty for long introns (G,-8,1) with canonical splice sites
--pen-noncanintronlen <func> penalty for long introns (G,-8,1) with noncanonical splice sites
--min-intronlen <int> minimum intron length (20)
--max-intronlen <int> maximum intron length (500000)
--known-splicesite-infile <path> provide a list of known splice sites
--novel-splicesite-outfile <path> report a list of splice sites
--novel-splicesite-infile <path> provide a list of novel splice sites
--no-temp-splicesite disable the use of splice sites found
--no-spliced-alignment disable spliced alignment
--rna-strandness <string> specify strand-specific information (unstranded)
--tmo reports only those alignments within known transcriptome
--dta reports alignments tailored for transcript assemblers
--dta-cufflinks reports alignments tailored specifically for cufflinks
--avoid-pseudogene tries to avoid aligning reads to pseudogenes (experimental option)
--no-templatelen-adjustment disables template length adjustment for RNA-seq reads

Scoring:
--mp <int>,<int> max and min penalties for mismatch; lower qual = lower penalty <6,2>
--sp <int>,<int> max and min penalties for soft-clipping; lower qual = lower penalty <2,1>
--no-softclip no soft-clipping
--np <int> penalty for non-A/C/G/Ts in read/ref (1)
--rdg <int>,<int> read gap open, extend penalties (5,3)
--rfg <int>,<int> reference gap open, extend penalties (5,3)
--score-min <func> min acceptable alignment score w/r/t read length
(L,0.0,-0.2)

Reporting:
-k <int> It searches for at most <int> distinct, primary alignments for each read. Primary alignments mean
alignments whose alignment score is equal to or higher than any other alignments. The search terminates
when it cannot find more distinct valid alignments, or when it finds <int>, whichever happens first.
The alignment score for a paired-end alignment equals the sum of the alignment scores of
the individual mates. Each reported read or pair alignment beyond the first has the SAM ‘secondary’ bit
(which equals 256) set in its FLAGS field. For reads that have more than <int> distinct,
valid alignments, hisat2 does not guarantee that the <int> alignments reported are the best possible
in terms of alignment score. Default: 5 (linear index) or 10 (graph index).
Note: HISAT2 is not designed with large values for -k in mind, and when aligning reads to long,
repetitive genomes, large -k could make alignment much slower.
--max-seeds <int> HISAT2, like other aligners, uses seed-and-extend approaches. HISAT2 tries to extend seeds to
full-length alignments. In HISAT2, --max-seeds is used to control the maximum number of seeds that
will be extended. For DNA-read alignment (--no-spliced-alignment), HISAT2 extends up to these many seeds
and skips the rest of the seeds. For RNA-read alignment, HISAT2 skips extending seeds and reports
no alignments if the number of seeds is larger than the number specified with the option,
to be compatible with previous versions of HISAT2. Large values for --max-seeds may improve alignment
sensitivity, but HISAT2 is not designed with large values for --max-seeds in mind, and when aligning
reads to long, repetitive genomes, large --max-seeds could make alignment much slower.
The default value is the maximum of 5 and the value that comes with -k times 2.
-a/--all HISAT2 reports all alignments it can find. Using the option is equivalent to using both --max-seeds
and -k with the maximum value that a 64-bit signed integer can represent (9,223,372,036,854,775,807).
--repeat report alignments to repeat sequences directly

Paired-end:
-I/--minins <int> minimum fragment length (0), only valid with --no-spliced-alignment
-X/--maxins <int> maximum fragment length (500), only valid with --no-spliced-alignment
--fr/--rf/--ff -1, -2 mates align fw/rev, rev/fw, fw/fw (--fr)
--no-mixed suppress unpaired alignments for paired reads
--no-discordant suppress discordant alignments for paired reads

Output:
-t/--time print wall-clock time taken by search phases
--un <path> write unpaired reads that didn't align to <path>
--al <path> write unpaired reads that aligned at least once to <path>
--un-conc <path> write pairs that didn't align concordantly to <path>
--al-conc <path> write pairs that aligned concordantly at least once to <path>
(Note: for --un, --al, --un-conc, or --al-conc, add '-gz' to the option name, e.g.
--un-gz <path>, to gzip compress output, or add '-bz2' to bzip2 compress output.)
--summary-file <path> print alignment summary to this file.
--new-summary print alignment summary in a new style, which is more machine-friendly.
--quiet print nothing to stderr except serious errors
--met-file <path> send metrics to file at <path> (off)
--met-stderr send metrics to stderr (off)
--met <int> report internal counters & metrics every <int> secs (1)
--no-head suppress header lines, i.e. lines starting with @
--no-sq suppress @SQ header lines
--rg-id <text> set read group id, reflected in @RG line and RG:Z: opt field
--rg <text> add <text> ("lab:value") to @RG line of SAM header.
Note: @RG line only printed when --rg-id is set.
--omit-sec-seq put '*' in SEQ and QUAL fields for secondary alignments.

Performance:
-o/--offrate <int> override offrate of index; must be >= index's offrate
-p/--threads <int> number of alignment threads to launch (1)
--reorder force SAM output order to match order of input reads
--mm use memory-mapped I/O for index; many 'hisat2's can share

Other:
--qc-filter filter out reads that are bad according to QSEQ filter
--seed <int> seed for random number generator (0)
--non-deterministic seed rand. gen. arbitrarily instead of using read attributes
--remove-chrname remove 'chr' from reference names in alignment
--add-chrname add 'chr' to reference names in alignment
--version print version information and quit
-h/--help print this usage message

</pre>
[[#top|Back to Top]]

=== Installation ===

Source code is obtained from [https://ccb.jhu.edu/software/hisat2/index.shtml HISAT2]

=== System ===
64-bit Linux

HISAT2-Sapelo2 - Revision history

Shtsai at 00:47, 5 April 2026

Shtsai at 19:41, 9 January 2026