Connecting - Revision history

Isaiah: Added note on connecting to cluster with PowerShell. Removed note on Cygwin, which linked to a wiki page that no longer exists.

2026-07-28T18:04:01Z

Added note on connecting to cluster with PowerShell. Removed note on Cygwin, which linked to a wiki page that no longer exists.

@@ Line 56: / Line 56: @@
 '''Examples of usage on Windows'''
-Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].
 ===Open a connection to Sapelo2 from off-campus===
@@ Line 131: / Line 150: @@
 '''Examples of usage on Windows'''
-Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY], but in the hostname, please use teach.gacrc.uga.edu (instead of the sample hostname in the screenshots on that page).
+If using Windows 11, then launch the PowerShell application and at the command prompt type
-You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]
+If using a version of Windows older than Windows 11, then please instead refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY], but in the hostname, please use teach.gacrc.uga.edu (instead of the sample hostname in the screenshots on that page).
 <!--

Shtsai at 16:07, 13 October 2025

2025-10-13T16:07:49Z

← Older revision		Revision as of 12:07, 13 October 2025
Line 4:		Line 4:

	Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=~~23812~~ archpass_duo] .		[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=23825 archpass_duo] .

	Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.
Line 85:		Line 85:

	Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=~~23812~~ archpass_duo] .		[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=23825 archpass_duo] .

	Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

Shtsai: /* Open a connection to Sapelo2 from off-campus */

2025-10-07T21:05:27Z

Open a connection to Sapelo2 from off-campus

← Older revision		Revision as of 17:05, 7 October 2025
Line 62:		Line 62:
	VPN is needed to connect to Sapelo2 from off-campus (outside the UGA main campus).		VPN is needed to connect to Sapelo2 from off-campus (outside the UGA main campus).

	For connecting from off-campus, please first connect to the UGA VPN and then connect to sapelo2.gacrc.uga.edu. Information on how to use the VPN is available at [ https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/ArticleDet?ID=154569 UGA_VPN].		For connecting from off-campus, please first connect to the UGA VPN and then connect to sapelo2.gacrc.uga.edu. Information on how to use the VPN is available at [https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/ArticleDet?ID=154569 UGA_VPN].

	===To run X Window applications remotely on your local machine===		===To run X Window applications remotely on your local machine===

Shtsai at 21:04, 7 October 2025

2025-10-07T21:04:55Z

← Older revision		Revision as of 17:04, 7 October 2025
Line 62:		Line 62:
	VPN is needed to connect to Sapelo2 from off-campus (outside the UGA main campus).		VPN is needed to connect to Sapelo2 from off-campus (outside the UGA main campus).

	For connecting from off-campus, please first connect to the UGA VPN and then connect to sapelo2.gacrc.uga.edu. Information on how to use the VPN is available at [https://~~eits~~.~~uga~~.~~edu~~/~~access_and_security~~/~~infosec~~/~~tools~~/~~vpn~~/ UGA_VPN].		For connecting from off-campus, please first connect to the UGA VPN and then connect to sapelo2.gacrc.uga.edu. Information on how to use the VPN is available at [ https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/ArticleDet?ID=154569 UGA_VPN].

	===To run X Window applications remotely on your local machine===		===To run X Window applications remotely on your local machine===
Line 169:		Line 169:
	VPN is needed to connect to the teaching cluster from off-campus (outside the UGA main campus).		VPN is needed to connect to the teaching cluster from off-campus (outside the UGA main campus).

	For connecting from off-campus, please first connect to the UGA VPN and then connect to teach.gacrc.uga.edu. Information on how to use the VPN is available at [https://~~eits~~.~~uga~~.~~edu~~/~~access_and_security~~/~~infosec~~/~~tools~~/~~vpn~~/ UGA_VPN]		For connecting from off-campus, please first connect to the UGA VPN and then connect to teach.gacrc.uga.edu. Information on how to use the VPN is available at [https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/ArticleDet?ID=154569 UGA_VPN]

	===To run X Window applications remotely on your local machine===		===To run X Window applications remotely on your local machine===

Shtsai at 20:58, 7 October 2025

2025-10-07T20:58:50Z

← Older revision		Revision as of 16:58, 7 October 2025
Line 4:		Line 4:

	Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://~~eits~~.~~uga~~.~~edu~~/~~access_and_security~~/~~infosec~~/~~tools~~/~~archpass~~ archpass_duo] .		[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=23812 archpass_duo] .

	Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.
Line 85:		Line 85:

	Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://~~eits~~.~~uga~~.~~edu~~/~~access_and_security~~/~~infosec~~/~~tools~~/~~archpass~~ archpass_duo] .		[https://uga.teamdynamix.com/TDClient/3190/eitsclientportal/KB/?CategoryID=23812 archpass_duo] .

	Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

Shtsai: /* Connecting to the teaching cluster */

2025-01-08T16:24:39Z

Connecting to the teaching cluster

← Older revision		Revision as of 12:24, 8 January 2025
Line 85:		Line 85:

	Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to the teaching cluster requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://eits.uga.edu/access_and_security/infosec/tools/~~archpass_duo~~ archpass_duo] .		[https://eits.uga.edu/access_and_security/infosec/tools/archpass archpass_duo] .

	Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

Shtsai at 16:24, 8 January 2025

2025-01-08T16:24:08Z

← Older revision		Revision as of 12:24, 8 January 2025
Line 4:		Line 4:

	Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to		Access to Sapelo2 requires an active MyID and password, and two-factor authentication with Archpass Duo. For more details of Archpass Duo, please refer to
	[https://eits.uga.edu/access_and_security/infosec/tools/~~archpass_duo~~ archpass_duo] .		[https://eits.uga.edu/access_and_security/infosec/tools/archpass archpass_duo] .

	Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

Ben at 13:53, 29 June 2021

2021-06-29T13:53:09Z

← Older revision		Revision as of 09:53, 29 June 2021
Line 14:		Line 14:

	You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]		You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]

			===Video Instructions===

			* [https://kaltura.uga.edu/playlist/dedicated/176125031/1_a6e4voao/1_s50lszs5 Connecting to Sapelo2 from Windows]
			* [https://kaltura.uga.edu/playlist/dedicated/176125031/1_a6e4voao/1_79mmimps Connecting to Sapelo2 from Mac]
			* [https://kaltura.uga.edu/playlist/dedicated/176125031/1_a6e4voao/1_z8tftk87 Connecting to Sapelo2 from Linux]

	===Open a connection to Sapelo2 on campus===		===Open a connection to Sapelo2 on campus===

Shtsai at 03:21, 6 January 2021

2021-01-06T03:21:54Z

← Older revision		Revision as of 23:21, 5 January 2021
Line 49:		Line 49:

	'''Examples of usage on Windows'''		'''Examples of usage on Windows'''

	Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].		Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].


	===Open a connection to Sapelo2 from off-campus===		===Open a connection to Sapelo2 from off-campus===
Line 89:		Line 89:

	You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]		You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]


	===Open a connection to the teaching cluster on campus===		===Open a connection to the teaching cluster on campus===
Line 160:		Line 159:

	-->		-->

	===Open a connection to the teaching cluster from off-campus===		===Open a connection to the teaching cluster from off-campus===

Shtsai at 03:20, 6 January 2021

2021-01-06T03:20:26Z

← Older revision		Revision as of 23:20, 5 January 2021
Line 8:		Line 8:
	Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the Sapelo2 is through secure shell (ssh) to the host sapelo2.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

	To connect via ssh, you must have an ssh software and a connection to the UGA campus network. An ssh software is included in recent releases of Unix based operating systems (including Linux and Mac OS X). ~~An SSH Secure Shell Utility is available for~~ Windows ~~on the [https://eits.uga.edu/hardware_and_software/software UGA Sitesoft] page (you will need to enter your UGA myID~~ and ~~password to download the software)~~. You ~~may also opt~~ to ~~use~~ PuTTY~~, for which instructions can be found~~ [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY ~~here,~~] or Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]		To connect via ssh, you must have an ssh software and a connection to the UGA campus network. An ssh software is included in recent releases of Unix based operating systems (including Linux and Mac OS X).

			If you are using a Windows computer, please download and install PuTTY. You can find detailed instructions on how to download and install PuTTY on your Windows computer at
			[https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].

			You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]

	===Open a connection to Sapelo2 on campus===		===Open a connection to Sapelo2 on campus===
Line 44:		Line 49:

	'''Examples of usage on Windows'''		'''Examples of usage on Windows'''
	Please refer to ~~below on "log in~~ to ~~teach via SSH Secure Shell on Windows~~."		Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].


	===Open a connection to Sapelo2 from off-campus===		===Open a connection to Sapelo2 from off-campus===
Line 77:		Line 83:
	Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.		Access to the teaching cluster is through secure shell (ssh) to the host teach.gacrc.uga.edu . If you have a local system that runs an X Window client or server, you can run X applications remotely.

	To connect via ssh, you must have an ssh software and a connection to the UGA campus network. An ssh software is included in recent releases of Unix based operating systems (including Linux and Mac OS X). ~~An SSH Secure Shell Utility is available for~~ Windows on ~~the~~ [https://~~eits~~.uga.edu/~~hardware_and_software~~/~~software UGA Sitesoft] page (you will need~~ to ~~enter your UGA myID~~ and ~~password~~ to ~~download the software)~~.		To connect via ssh, you must have an ssh software and a connection to the UGA campus network. An ssh software is included in recent releases of Unix based operating systems (including Linux and Mac OS X).

			If you are using a Windows computer, please download and install PuTTY. You can find detailed instructions on how to download and install PuTTY on your Windows computer at
			[https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY].

			You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]


	===Open a connection to the teaching cluster on campus===		===Open a connection to the teaching cluster on campus===
Line 113:		Line 125:

	'''Examples of usage on Windows'''		'''Examples of usage on Windows'''
	Here are steps for log in to teach via SSH Secure Shell. You may also opt to use PuTTY, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY here,] or Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]

			Please refer to [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_PuTTY How to Install and Configure PuTTY], but in the hostname, please use teach.gacrc.uga.edu (instead of the sample hostname in the screenshots on that page).

			You may also opt to use Cygwin, for which instructions can be found [https://wiki.gacrc.uga.edu/wiki/How_to_Install_and_Configure_Cygwin here.]

			<!--
	1.		1.

Line 142:		Line 158:

	[[File:Teach login 3.png]]		[[File:Teach login 3.png]]

			-->

	===Open a connection to the teaching cluster from off-campus===		===Open a connection to the teaching cluster from off-campus===